![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
||||
|
I wouldn't bother with 1320, you'd spend a fortune getting there.
I'd check out D&S Motor Sport in Great Leighs. It's closer to you and I know for sure that Emily has had some bits and pieces done. D&S Motorsport - Mini Club UK
__________________
Have Got ~ PlayMINI Exhaust, Dave.F Hybrid Air Filter, Custom BBR I/C Intake, Paul Martin & AndyH Detail, JCW AeroKit Front Bumper and Side Skirts, JCW GP Rear Bumper Trims, Aero Grill, 15% KAVS Pulley To Get ~ Janspeed Manifold & GP Intercooler |
|
||||
|
Dont go to Chelmsford or Colchester MINI
![]() If your planning other mods when going to 1320 may be worth it but if not a local place should be able to do it as its basically just plugs, filters, aux belt and an oil change... just make sure that the right belt is used as you have a reduced size pulley - BMW would probably just chuck a standard size one on unless you were to provide them with the correct belt to fit ![]() In fact, its probably just checking what other parts you have fitted that have been upgraded and make sure the garage you go to is able to fit the same / same spec parts otherwise you could have problems (plugs for example). Bear in mind a set of plugs is ~£12 and a belt ~ £30 from 1320 and you know they will be the right ones.... Hopefully your Inspection 2 goes better than when mine did !! I had a missfire (bad plugs) broken air box and they snapped my strut brace.... yours must go better than that !! lol
__________________
Back in the fold... but being tempted out again... |
|
||||
|
But the belt and plugs have only done 3000 miles tops
__________________
I love LOUD NOISES while spitting FIRE!! Mods: omp strut brace, spax lowering springs, Dave.f, grs motorsport ic, milltek exhaust system, janspeed decat manifold, 17% pulley newman cam, 550cc injectors and mynes tune Next mod power or cosmetic I still don't know yet |
|
||||
|
Fair nuff dude - was just making the point that if changed make sure the correct ones are used as 'normal' garages may not realise that upgrades have been fitted while BMW will probably sulk
__________________
Back in the fold... but being tempted out again... |
|
||||
|
why dont you do it yourself dan ? surely your car only will need an oil and filter change and pollen filter as all the other bits have been done
|
|
||||
|
Not a bad shout as I could stamp the book my self at work
__________________
I love LOUD NOISES while spitting FIRE!! Mods: omp strut brace, spax lowering springs, Dave.f, grs motorsport ic, milltek exhaust system, janspeed decat manifold, 17% pulley newman cam, 550cc injectors and mynes tune Next mod power or cosmetic I still don't know yet |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|