I'm helping my little bro remove his viper stripes as they have gone a funny colour and just look crap but they keep braking apart and it is starting to do my nut in any tips or advice would be most appreciated

Thanks

__________________

With only a Dave.f and she puts out 200 bhp
And in 30 odd degree heat she is still putting out 200 bhp
Mods: omp strut brace, spax lowering springs, Dave.f, grs motorsport ic, full milltek exhaust system
Next mod 15% pulley

I used a hair dryer to remove my stripes... I used the hottest setting and once warm, peeled off fairly easily... (even after being fitted 4 years)

__________________
Black and blue all over
Full Aero Kit, Black II Tailgate release/Scoop, Orciari scuttle scoops, Dechromed Beltline, A-Panels, Door Handles in Black II, Black Fascia in Black II, Headlight rings and Aero grill surround in Hyper Blue, Stubby aerial, JCW CF Dash and Gearknob, JCW Sparcos and rear bench, GTT Strut Brace, 15% Reduced Pulley, Borla Race Catback, Janspeed Manifold, GP Intercooler, Newman Cam, 550cc Injectors, Colder plugs, Mynes Tune, Dave F Hybrid Airbox, KW V1 Coilovers, r56 Brakes

Yes you need heat, don't try pulling them without otherwise you may lose paint if they've been on the car for a while.

__________________

My MINI whines a lot...

You will need to do a bit of polishing / claying and clean up the paint after they are off too as they will have left their mark... mine took a couple of months of cleaning before the marks had completely gone...

__________________
Stock - although still tempted by a Janspeed, light wheels, R56 S brakes, and a GRS IC...

Thanks guys I was using heat but I have turned it up and there still doing it so I have gave up and left my bro 2 it lol

__________________

With only a Dave.f and she puts out 200 bhp
And in 30 odd degree heat she is still putting out 200 bhp
Mods: omp strut brace, spax lowering springs, Dave.f, grs motorsport ic, full milltek exhaust system
Next mod 15% pulley